AX high-performance milling cutters

r RDOC Machining strategy for weak or thin-walled components 1. HPC roughing of NL & ML neck with AX-FPS up to depth of approx. 4xd • Penetration w. helical interpolation • Roughing from the inside to the outside • Roughing layer by layer • Cutting data: FRAISA ToolExpert ® • Alternate both sides of the wall per layer • Final pass with RDOC = 0 • Allowance per side of wall with RDOC = PF+F N° 95500 N° 95505 • The base can also be milled prior to finishing (wall finishing) • Milling of the base with AX-RV • Root radius with AX-RV or AX fin- ishing cutter with corner radius • Root radius: Program a small clearance of approx. 0.0008 in from wall and base 2. HDC roughing of ML & 5.2xd with AX-FPS up to depth of 5.2xd • Penetration w. helical interpolation • Cutting data: FRAISA ToolExpert ® • Weak: 2x contour milling with RDOC = 0.05xd1 and final track with blank cut RDOC = 0. Use speed RPM and Feed from PF application for weak components from AX finishing cutter. • Allowance per side of wall with RDOC = PF+F N° 95506 N° 95507 4. Milling of the base and root radius • Prefinishing PF, both sides of wall • Finishing F, both sides of wall • Cutting data: FRAISA ToolExpert ® or cutting data page for weak components • Adjust dynamics (Speed) to compo- nent and machine environment 3. Finishing of wall with AX finishing cutter up to depth of 5.2xd N° 95510 N° 95512 [ 6 ]