AX high-performance milling cutters

HDC roughing • With medium-long and 5.2xd versions • Programming with constant cutting conditions and dynam- ic travel range • No abrupt changes of direction • Programming of the minimum curvature radius 1.05xd1 or 1.10xr • Degrease cylindrical shanks and chucking devices before assembling • Always fully complete roughing of each plane both inside and outside • Speed n high, depending on dynamics and torque of the machine • Final pass with ae = 0 HPC roughing • With normal or medium-long version with neck and with largest possible ap and ae, and normal fz • Cutting data acc. to FRAISA ToolExpert ® AX-FPS • Avoid vibration by varying the speed in FRAISA ToolExpert ® AX-FPS – the volume remains constant • For weak components: 2x contour milling with ae = 0.05xd1 and final pass with ae = 0 • Always machine each cut alternately on the inside and outside, working toward the final contour Notes on application technology: Roughing and finishing combined Roughing with AX-FP S With AX-FPS technology , productiv- ity and cost efficiency take absolute top priority. Positive, easy-cut geom- etries and mirror-finish flutes ensure excellent chip formation and good chip removal that benefits from a central coolant supply. This guarantees maxi- mum performance. [ 4 ]